(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
At-a-glance instructions on how to promote an approved hook to a Prep area
|
- Check list for nomination review completeness
-
- 1) Select a hook from the approved nominations page that has one of these ticks at the bottom post:
.
- 2) Check to make sure basic review requirements were completed.
- a. Any outstanding issue following
needs to be addressed before promoting.
- 3) Check the article history for any substantive changes since it was nominated or reviewed.
- 4) Images for the lead slot must be freely licensed. Fair-use images are not permitted. Images loaded on Commons that appear on the Main Page are automatically protected by KrinkleBot.
- 5) Hook must be stated in both the article and source (which must be cited at the end of the article sentence where stated).
- 6) Hook should make sense grammatically.
- 7) Try to vary subject matters within each prep area.
- 8) Try to select a funny, quirky or otherwise upbeat hook for the last or bottom hook in the set.
- Steps to add a hook to prep
- In one tab, open the nomination page of the hook you want to promote.
- In a second tab, open the prep set you intend to add the hook to.
- 1) For hooks held for specific dates, refer to "Local update times" section on DYK Queue.
- a. Completed Prep area number sets will be promoted by an administrator to corresponding Queue number.
- 2) Copy and paste the hook into a chosen slot.
- a. Make sure there's a space between ... and that, and a ? at the end.
- b. Check that there's a bold link to the article.
- 3) If it's the lead (first) hook, paste the image where indicated at the top of the template.
- 4) Copy and paste ALL the credit information (the {{DYKmake}} and {{DYKnom}} templates) at the bottom
- 5) Check your work in the prep's Preview mode.
- a. At the bottom under "Credits", to the right of each article should have the link "View nom subpage" ; if not, a subpage parameter will need to be added to the DYKmake.
- 6) Save the Prep page.
- Closing the DYK nomination page
-
- At the upper left
- Change
{{DYKsubpage to {{subst:DYKsubpage
- Change
|passed= to |passed=yes
- At the bottom
- Just above the line containing
}}<!--Please do not write below this line or remove this line. Place comments above this line.-->
insert a new, separate line containing one of the following:
To [[T:DYK/P1|Prep 1]]
To [[T:DYK/P2|Prep 2]]
To [[T:DYK/P3|Prep 3]]
To [[T:DYK/P4|Prep 4]]
To [[T:DYK/P5|Prep 5]]
To [[T:DYK/P6|Prep 6]]
To [[T:DYK/P7|Prep 7]]
- Also paste the same thing into the edit summary.
- Check in Preview mode. Make sure everything is against a pale blue background (nothing outside) and there are no stray characters, like
}}, at the top or bottom.
- Save.
For more information, please see T:TDYK#How to promote an accepted hook.
|
Handy copy sources: To [[T:DYK/P1|Prep 1]] To [[T:DYK/P2|Prep 2]] To [[T:DYK/P3|Prep 3]] To [[T:DYK/P4|Prep 4]] To [[T:DYK/P5|Prep 5]] To [[T:DYK/P6|Prep 6]] To [[T:DYK/P7|Prep 7]]