Receive-after-transmit time delay
TemplateStyles' src attribute must not be empty.
This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (January 2013) |
In telecommunications, receive-after-transmit time delay is the time interval between (a) the instant of keying off the local transmitter to stop transmitting and (b) the instant the local receiver output has increased to 90% of its steady-state value in response to an RF signal from another transmitter.
The RF signal from the distant transmitter must exist at the local receiver input prior to, or at the time of, keying off the local transmitter.
Receive-after-transmit time delay applies only to half-duplex operation.
See also
References
Public Domain This article incorporates public domain material from the General Services Administration document: "Federal Standard 1037C". (in support of MIL-STD-188)
